hamess connector with the speed sensor connector s reconnected should be 1000 2500 ohms if open replace harness Speed sensor lead s shorted to Disconnect speed sensor connector s and ground check continuity of speed
| Book | Page | Context |
|---|---|---|
|
|
connector s and check continu Ignition switch on or engine ity acrox sensor terminals should be running 1000 2500 ohms If not replace sensor s Remove connector s to controller and check resistance across terminals ... hamess connector with the speed sensor connector s reconnected should be 1000 2500 ohms if open replace harness Speed sensor lead s shorted to Disconnect speed sensor connector s and ground check continuity of speed |